Bostitch SFC240L-U110L RC6HP Air Compressor Manual

The Bostitch SFC240L-U110L RC6HP is a compact air compressor designed for various pneumatic applications. It features a powerful motor, a durable tank, and is ideal for both professional and DIY use. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 2.6 SCFM at 90 PSI, oil-free pump, lightweight design, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
Oil-Free Pump	Requires less maintenance and is environmentally friendly
Lightweight Design	Easy to transport and store
Pressure Gauges	Allows for easy monitoring of air pressure
Quick Connect Fittings	Facilitates easy attachment of air tools

Installation

Unpack and inspect contents. Place on a stable surface.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a power outlet: Use a grounded outlet for safety.
Check for leaks: Use soapy water to check connections.

WARNING! Always ensure the compressor is off before making connections.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Adjust the regulator to your required PSI.
Test the compressor: Run the compressor to ensure it builds pressure.
Check for proper operation: Ensure all components are functioning correctly.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 6 gallons.
Max Pressure: 150 PSI.
SCFM: 2.6 SCFM at 90 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access controls on the front panel: power switch, pressure regulator, and quick connect fittings.

Pressure Regulator: Adjusts the output pressure for air tools.

On/Off Switch: Located on the front for easy access.

Connecting Devices

Connect air tools using quick connect fittings.

Ensure the compressor is off before connecting tools.
Match the tool fitting to the compressor outlet.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the power switch.
Adjust the pressure regulator to the desired setting.
Connect your air tool and begin operation.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles and hearing protection.
Keep the compressor in a well-ventilated area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Loose components	Tighten any loose screws or fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact Bostitch customer service.