Bostitch SFC240L-U110L Air Compressor Manual

The Bostitch SFC240L-U110L is a compact and powerful air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a 2.5-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.5-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
2.5-gallon tank	Provides sufficient air supply for various tasks
150 PSI maximum pressure	Delivers high pressure for efficient operation
Oil-free pump	Requires less maintenance and is environmentally friendly
Lightweight design	Easy to transport and store
Pressure gauge	Allows for easy monitoring of air pressure

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Ensure the hose is securely attached to the compressor outlet.
Plug into AC power: Use a grounded outlet to avoid electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Ensure the compressor is placed in a well-ventilated area to avoid overheating.

First-Time Setup

Power on the compressor; follow the setup instructions.

Adjust pressure settings: Use the regulator to set the desired pressure.
Test operation: Run the compressor briefly to ensure proper functionality.
Check safety features: Ensure all safety mechanisms are operational.

CAUTION! Do not exceed the maximum pressure rating during operation.

Specifications

Tank Size: 2.5 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Pump Type: Oil-free.
Noise Level: 68 dBA.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Includes a thermal overload protector and safety relief valve.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Attach the air hose to the tool: Ensure a secure fit.
Check connections: Inspect for any leaks or loose fittings.
Power on the compressor: Turn on the unit to begin operation.

Tip: Always use the appropriate fittings for your tools.

Operating the Compressor

Follow these steps to operate the compressor effectively.

Turn on the compressor: Use the on/off switch.
Adjust the pressure: Set the desired pressure using the regulator.
Monitor the gauge: Keep an eye on the pressure gauge during operation.
Turn off when done: Switch off the compressor after use.

WARNING! Do not leave the compressor unattended while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank: Release moisture after each use.
Inspect the air filter: Clean or replace as needed.
Check for leaks: Regularly inspect hoses and fittings.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Compressor runs continuously	Faulty pressure switch	Replace the pressure switch.
Excessive noise	Loose components	Tighten all screws and fittings.

Service: For assistance, contact Bostitch customer service.