Bostitch SFC240L Air Compressor Manual

The Bostitch SFC240L is a compact and portable air compressor designed for a variety of applications including inflation, nailing, and stapling. It features a powerful 6-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy transport. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tools
150 PSI Maximum Pressure	Delivers high pressure for efficient operation
Oil-Free Pump	Requires no maintenance and reduces mess
Lightweight Design	Easy to transport and maneuver
Pressure Gauges	Allows for easy monitoring of air pressure

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your tool.
Check all connections for leaks before use.
Allow the compressor to build pressure before operating tools.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Compressor Type: Oil-free.
Weight: 30 lbs.
Power Source: 120V AC.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access the pressure regulator and gauges located on the front panel. The on/off switch is also located here for easy access.

Pressure Regulator: Adjusts the output pressure for connected tools.

Gauges: Display tank pressure and regulated pressure.

Connecting Devices

Connect air tools using the appropriate fittings for your air hose.

Ensure the compressor is off before connecting tools.
Match the tool fittings to the air hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow the instructions for using air tools effectively.

Turn on the compressor and allow it to build pressure.
Use the tool as per the manufacturer's instructions.
Monitor the pressure gauges during operation.

WARNING! Do not operate tools beyond their rated pressure.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating of tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
No pressure build-up	Leak in the system	Inspect for leaks and tighten connections.
Excessive noise	Loose parts	Tighten all screws and bolts.
Pressure gauge not working	Faulty gauge	Replace the pressure gauge.

Service: For assistance, contact Bostitch customer support.