Bostitch RC6-U110 Air Compressor Manual

The Bostitch RC6-U110 is a compact and powerful air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, oil-free pump, easy-to-read pressure gauge, and quick-connect fittings.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
Portable Design	Lightweight and easy to transport.
Pressure Gauge	Allows for easy monitoring of air pressure.
Quick-Connect Fittings	Facilitates fast and easy tool changes.
Safety Valve	Prevents over-pressurization.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the compressor outlet.
Ensure the power switch is in the OFF position.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Always ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Before using the compressor, ensure all connections are secure and the unit is properly set up.

Check the oil level (if applicable) and ensure it is filled to the recommended level.
Set the desired pressure using the regulator.
Test the compressor with a small load to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Model: Bostitch RC6-U110.
Power Source: 120V AC.
Max Pressure: 110 PSI.
Tank Size: 6 gallons.
Weight: 30 lbs.
Noise Level: 68 dBA.
Air Delivery: 2.6 CFM at 90 PSI.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and pressure gauge.

Pressure Regulator: Adjusts the output pressure to the desired level.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

To connect tools or devices, ensure the compressor is turned off and unplugged.

Attach the air hose to the compressor outlet.
Connect the other end of the hose to the tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Allow the compressor to build pressure to the set level.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check and replace the air filter regularly.
Drain the tank to remove moisture after each use.
Inspect hoses and connections for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Pressure drops	Faulty regulator	Replace the pressure regulator.

Service: For assistance, contact Bostitch customer support.