Bostitch RC10SQ-U Air Compressor Manual

The Bostitch RC10SQ-U is a compact and powerful air compressor designed for a variety of applications, including inflating tires, powering pneumatic tools, and more. It features a 10-gallon tank, a maximum pressure of 150 PSI, and a quiet operation at only 78 dBA. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-gallon tank, oil-free pump, pressure gauge, quick-connect coupler, and a compact design for easy transport.

Feature	Description
10-Gallon Tank	Provides ample air storage for extended use
Oil-Free Pump	Requires no maintenance and reduces the risk of oil contamination
Pressure Gauge	Allows for easy monitoring of air pressure
Quick-Connect Coupler	Enables fast and easy connection to air tools
Compact Design	Easy to transport and store
Low Noise Level	Operates at only 78 dBA for quieter use

Installation

Unpack and inspect contents. Place the compressor on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a grounded outlet: Use a dedicated circuit to avoid overload.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Ensure the compressor is placed in a well-ventilated area to prevent overheating.

First-Time Setup

Power on the compressor; follow the setup instructions provided.

Set the desired pressure: Use the pressure regulator to adjust.
Test with an air tool: Ensure proper operation before extensive use.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 10 gallons.
Max Pressure: 150 PSI.
Noise Level: 78 dBA.
Power Source: 120V AC.
Weight: 75 lbs.
Dimensions: 30 x 18 x 18 inches.

Controls and Settings

Access controls on the front panel: Power switch, pressure regulator, and pressure gauge.

Operation: Turn on the power switch, set the desired pressure, and connect your air tool.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is off before connecting.
Match the coupler to the tool's connector.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the power switch.
Set the desired pressure using the regulator.
Connect your air tool and begin operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor away from flammable materials.
Do not operate in wet conditions.
Use appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact Bostitch customer service.