Bostitch RC-10-U110 Air Compressor Manual

The Bostitch RC-10-U110 is a reliable air compressor designed for various applications, including powering pneumatic tools, inflating tires, and more. It features a powerful motor, a durable tank, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-gallon tank, 1.5 HP motor, pressure gauge, quick-connect fittings, and safety valve.

Feature	Description
10-Gallon Tank	Provides ample air storage for extended use
1.5 HP Motor	Delivers reliable power for various applications
Pressure Gauge	Monitors air pressure for optimal performance
Quick-Connect Fittings	Allows for easy attachment of air tools
Safety Valve	Prevents over-pressurization for user safety

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure it is securely attached to the quick-connect fitting.
Plug into a power outlet: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure regulator to adjust the output pressure.
Test the compressor: Run it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 10 gallons.
Motor Power: 1.5 HP.
Maximum Pressure: 125 PSI.
Weight: 70 lbs.
Dimensions: 30 x 18 x 20 inches.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect fittings.

Ensure the compressor is off before connecting tools.
Match the tool's connector to the compressor's fitting.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired setting.
Connect your air tool and begin operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor in a dry, well-ventilated area.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten any loose screws or components.
Overheating	Blocked vents	Ensure vents are clear and clean.

Service: For further assistance, contact Bostitch customer service.