Bostitch RC-10 Air Compressor Manual

The Bostitch RC-10 is a reliable air compressor designed for both professional and DIY use. It features a powerful motor, a durable tank, and various safety features to ensure optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-gallon tank, oil-free pump, pressure gauge, quick-connect coupler, and safety relief valve.

Feature	Description
10-Gallon Tank	Provides ample air storage for various tasks
Oil-Free Pump	Requires less maintenance and is environmentally friendly
Pressure Gauge	Allows for easy monitoring of air pressure
Quick-Connect Coupler	Facilitates quick and easy tool changes
Safety Relief Valve	Prevents over-pressurization for user safety

Installation

Unpack and inspect contents. Place on a stable surface away from moisture.

Connect the air hose: Ensure it is securely attached to the quick-connect coupler.
Plug into AC power: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the setup instructions provided.

Set the desired pressure: Use the pressure regulator to adjust to the required PSI.
Check the oil level: Ensure the oil level is adequate if applicable.
Test the compressor: Run the compressor briefly to ensure proper operation.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 10 gallons.
Motor Power: 1.5 HP.
Max Pressure: 150 PSI.
Air Delivery: 5.3 CFM at 40 PSI.
Weight: 75 lbs.
Dimensions: 30 x 15 x 28 inches.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access controls via the front panel: Power switch, pressure regulator, and pressure gauge.

Safety Features: Automatic shut-off, thermal overload protection.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet with the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check tool compatibility with the compressor's PSI rating.

Operating Instructions

Follow these steps to operate the compressor effectively.

Turn on the compressor using the power switch.
Adjust the pressure regulator to the desired PSI.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear appropriate safety gear.
Keep the compressor in a well-ventilated area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten loose screws and bolts.
Pressure drops	Faulty pressure regulator	Replace the pressure regulator.

Service: For support, contact Bostitch customer service.