Bostitch Oil Free Air Compressor 2.0 HP Manual

The Bostitch Oil Free Air Compressor 2.0 HP is designed for durability and efficiency, providing reliable air power for a variety of applications. This manual covers essential safety information, features, installation, operation, and troubleshooting tips to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Troubleshooting

Features at a Glance

This air compressor features an oil-free pump, which means less maintenance and longer life. It includes a 6-gallon tank, a maximum pressure of 150 PSI, and a quick recovery time, making it ideal for various tasks.

Feature	Description
Oil-Free Pump	Requires no oil, reducing maintenance needs.
6-Gallon Tank	Provides ample air storage for extended use.
150 PSI Maximum Pressure	Delivers high pressure for demanding applications.
Quick Recovery Time	Reduces downtime between uses.
Portable Design	Lightweight and easy to transport.

Installation

Before using the compressor, ensure it is placed on a stable surface and connected to a suitable power source.

Unpack the compressor and inspect for any damage.
Place the compressor in a well-ventilated area.
Connect the air hose to the outlet port.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is off before connecting or disconnecting hoses.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Turn the power switch to the ON position.
Adjust the pressure regulator to the desired PSI.
Allow the compressor to build pressure until it reaches the set point.
Connect your air tools and begin operation.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Power: 2.0 HP.
Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Weight: 30 lbs.
Dimensions: 24 x 12 x 23 inches.
Noise Level: 78 dBA.
Power Source: 120V AC.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure gauge, and regulator for adjusting output pressure.

Pressure Gauge: Displays current tank pressure.

Regulator: Adjusts the pressure output to your tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Connect the air hose to the outlet port.
Attach your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before use.

Operating Instructions

To operate the compressor, follow these steps:

Turn on the compressor.
Allow it to reach the desired pressure.
Use your air tools as needed.
Monitor the pressure gauge during operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check and clean the air filter regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and connections for wear and tear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten all screws and fittings.
Overheating	Blocked air intake	Ensure air intake is clear.

Service: For further assistance, contact Bostitch customer support.