Bostitch CWC200ST Air Compressor Manual

The Bostitch CWC200ST is a compact and portable air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a powerful 2.0 HP motor, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 2.0 HP motor, maximum pressure of 150 PSI, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Suitable for powering a wide range of pneumatic tools
Portable Design	Easy to transport and store
Oil-Free Pump	Requires less maintenance and provides cleaner air
Pressure Gauge	Allows for easy monitoring of air pressure

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the power cord is plugged into a grounded outlet.
Check that all connections are secure before operating.

WARNING! Ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Turn the power switch to the ON position.
Adjust the pressure regulator to the desired PSI.
Allow the compressor to build up pressure before use.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Motor Power: 2.0 HP.
Maximum Pressure: 150 PSI.
Weight: 40 lbs.
Dimensions: 24 x 12 x 23 inches.
Power Source: 120V AC.
Noise Level: 78 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for your tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Use the appropriate air hose to connect your pneumatic tools to the compressor.

Ensure the compressor is off before connecting tools.
Match the hose fittings to the tool connections.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor and allow it to reach the set pressure.
Connect your tool and begin operation.
Monitor the pressure gauge during use.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check the oil level and change if necessary.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not exceed the maximum pressure rating.
Keep the compressor away from flammable materials.
Wear appropriate safety gear when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
No pressure build-up	Leak in the system	Inspect for leaks and tighten connections.
Excessive noise	Worn parts	Inspect and replace worn components.
Pressure gauge not working	Faulty gauge	Replace the pressure gauge if necessary.

Service: For further assistance, contact Bostitch customer service.