Bostitch CAP6080WB Air Compressor Manual

The Bostitch CAP6080WB is a powerful 6-gallon air compressor designed for a variety of applications, including inflating tires, powering pneumatic tools, and more. It features a durable design, oil-free pump, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, pressure gauge, quick-connect coupler, and built-in handle for portability.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
6-Gallon Tank	Offers a good balance of portability and air supply.
150 PSI Maximum Pressure	Allows for a wide range of applications.
Quick-Connect Coupler	Enables easy attachment of air hoses and tools.
Pressure Gauge	Monitors tank pressure for optimal performance.

Installation

Unpack and inspect the compressor. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the compressor is plugged into a grounded outlet.
Check that all connections are secure before operating.

WARNING! Ensure the compressor is not placed near flammable materials.

First-Time Setup

Power on the compressor and set the desired pressure using the pressure regulator.

Adjust the pressure to the required level for your application.
Check for any air leaks before use.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Noise Level: 78 dBA.
Pump Type: Oil-free.
Dimensions: 24 x 12 x 23 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is turned off before connecting tools.
Match the tool's air hose to the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure to match the requirements of your tool.
Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in enclosed spaces without ventilation.

Maintenance

Regular maintenance ensures optimal performance.

Check and clean the air filter regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not exceed the maximum pressure rating.
Keep the compressor away from water and moisture.
Use appropriate personal protective equipment when operating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose parts	Tighten screws and check for loose components.
Overheating	Blocked air intake	Ensure air intake is clear of obstructions.

Reset: Unplug and plug back in to reset the compressor.