Bostitch CAP5580WB Air Compressor Manual

The Bostitch CAP5580WB is a powerful air compressor designed for both professional and DIY use. It features a 5.5-gallon tank, a maximum pressure of 150 PSI, and a 2.0 HP motor. This compressor is ideal for a variety of applications, including inflating tires, powering pneumatic tools, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 5.5-gallon tank, 150 PSI maximum pressure, 2.0 HP motor, oil-free pump, and easy-to-read pressure gauge.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
5.5-Gallon Tank	Provides ample air supply for various tasks.
150 PSI Maximum Pressure	Suitable for a wide range of applications.
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of air pressure.
Portable Design	Equipped with wheels for easy transportation.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from direct sunlight and moisture.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Always ensure the compressor is turned off and unplugged before making any adjustments.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Set the desired pressure using the regulator.
Check for any air leaks in the connections.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Capacity: 5.5 gallons.
Maximum Pressure: 150 PSI.
Motor Power: 2.0 HP.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 78 dBA.
Power Source: 120V AC.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and pressure gauge.

Pressure Regulator: Adjusts the output pressure to the desired level.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect pneumatic tools using the air hose attached to the compressor outlet.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet to the hose fitting.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check the tool's specifications for compatible pressure settings.

Operating the Compressor

To operate the compressor, follow the steps below:

Turn on the compressor using the on/off switch.
Allow the compressor to build pressure to the set level.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check and tighten all connections regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect the air filter and clean or replace as necessary.

CAUTION! Always disconnect the power before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Keep the compressor in a well-ventilated area.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Insufficient pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Compressor shuts off	Overheating	Allow to cool down before restarting.

Service: For further assistance, contact Bostitch customer support.