Bostitch CAP2000P-OF-CA Air Compressor Manual

The Bostitch CAP2000P-OF-CA is a portable air compressor designed for various applications including inflating tires, powering pneumatic tools, and more. It features a 2.0-gallon tank, oil-free pump for maintenance-free operation, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.0-gallon tank, oil-free pump, pressure gauge, quick-connect air outlet, and built-in handle for portability.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
2.0-gallon tank	Compact size for easy transport and storage.
150 PSI maximum pressure	Suitable for a variety of applications.
Quick-connect outlet	Easy attachment for air hoses and tools.
Pressure gauge	Allows for easy monitoring of air pressure.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect outlet.
Ensure the pressure gauge is functional and visible.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is off before connecting any tools.

First-Time Setup

Power on the compressor and set the desired pressure using the pressure regulator.

Turn the power switch to the ON position.
Adjust the pressure regulator to the required PSI for your application.
Check for any air leaks before use.

CAUTION! Do not exceed the maximum pressure rating of 150 PSI.

Specifications

Tank Size: 2.0 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Noise Level: 68 dBA.
Pump Type: Oil-free.

Controls and Settings

Access the pressure regulator and power switch located on the front panel. The pressure gauge displays the current tank pressure.

Controls: Power switch, pressure regulator, quick-connect outlet.

Connecting Devices

Connect air tools using the quick-connect outlet. Ensure the compressor is off before making connections.

Turn off the compressor.
Attach the air hose to the quick-connect outlet.
Connect the other end of the hose to your air tool.

Tip: Always check for leaks after connecting.

Operating the Compressor

To operate, turn on the compressor and adjust the pressure as needed for your application.

Power on the compressor.
Adjust the pressure regulator to the desired setting.
Use your air tool as needed.

WARNING! Do not operate without proper safety gear.

Maintenance

Regular maintenance is essential for optimal performance. Ensure the compressor is unplugged before performing maintenance.

Check for air leaks regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect the power cord for damage.

CAUTION! Always follow safety guidelines during maintenance.

Safety Information

Read all safety instructions before operating the compressor. Use appropriate safety gear and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Low pressure	Air leaks	Inspect for leaks and tighten connections.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank does not fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For assistance, contact Bostitch customer support.