Bostitch CAP2000P-OF Air Compressor Manual

The Bostitch CAP2000P-OF is a powerful and efficient air compressor designed for a variety of applications, including inflating tires, powering pneumatic tools, and more. It features a 2.0-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.0-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
Pressure Gauge	Easy-to-read gauge for monitoring pressure levels.
Portability	Lightweight design for easy transport.
Quick Connect Coupler	Allows for easy attachment of air hoses and tools.
Safety Valve	Prevents over-pressurization for user safety.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a grounded outlet: Use a suitable power source.
Check for leaks: After setup, turn on the compressor and check for air leaks.

WARNING! Ensure the compressor is placed in a well-ventilated area to avoid overheating.

First-Time Setup

Power on the compressor; follow the instructions for initial setup.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.
Check connections: Ensure all hoses and fittings are secure.

CAUTION! Do not exceed the maximum pressure rating of 150 PSI.

Specifications

Tank Size: 2.0 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 18 x 15 x 15 inches.
Noise Level: 68 dBA.
Pump Type: Oil-free.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for various tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air hoses and tools using the quick connect coupler.

Ensure the compressor is off before connecting devices.
Match the hose to the appropriate tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired level.
Connect your tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure while operating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check the air filter regularly and clean or replace as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor away from flammable materials.
Do not operate in wet conditions.
Always wear safety goggles when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten screws and fittings.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For further assistance, contact Bostitch customer service.