Bostitch CAP1580WB Air Compressor Manual

The Bostitch CAP1580WB is a portable air compressor designed for a variety of applications, including inflation, nailing, and stapling. It features a 2.6-gallon tank, a maximum pressure of 150 PSI, and a powerful 0.8 HP motor. The compressor is lightweight and easy to transport, making it ideal for both home and professional use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.6-gallon tank, 150 PSI maximum pressure, 0.8 HP motor, lightweight design, and easy portability.

Feature	Description
Tank Capacity	2.6 gallons for extended use
Maximum Pressure	150 PSI for versatile applications
Motor Power	0.8 HP for efficient performance
Weight	Lightweight design for easy transport
Noise Level	Quiet operation for indoor use
Portability	Built-in handle for easy carrying

Installation

Unpack and inspect the compressor. Place it on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Check oil levels: Ensure the oil is at the recommended level if applicable.
Plug into AC power: Use a grounded outlet for safety.

WARNING! Ensure the compressor is off before making connections.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the pressure regulator: Adjust to the desired PSI for your application.
Check for leaks: Use soapy water to check connections.
Test operation: Run the compressor briefly to ensure proper function.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 2.6 gallons.
Max Pressure: 150 PSI.
Motor Power: 0.8 HP.
Weight: 29 lbs.
Noise Level: 78 dBA.
Power Source: 120V AC.
Operating Temperature: 50°F to 104°F.

Controls and Settings

Access the pressure regulator and on/off switch located on the compressor panel.

Pressure Regulator: Adjusts the output pressure for various applications.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the appropriate fittings.

Turn off the compressor before connecting tools.
Match fittings to ensure a secure connection.
Check for leaks after connecting.

Tip: Always use the correct fittings for your air tools.

Operating Instructions

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired setting.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor in a well-ventilated area.
Avoid using the compressor in wet conditions.
Wear appropriate safety gear when using air tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Pressure drops	Faulty pressure regulator	Replace the pressure regulator if necessary.

Reset: Unplug and plug back in to reset the compressor.

Service: For support, contact Bostitch customer service.