Bostitch CAP1512-OF-CA Air Compressor Manual

The Bostitch CAP1512-OF-CA is a compact, portable air compressor designed for a variety of applications including inflation, nailing, and stapling. It features a 1.5-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy transport. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 1.5-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
150 PSI Maximum Pressure	Allows for a variety of applications.
1.5-Gallon Tank	Compact size for easy storage and transport.
Pressure Gauge	Easy monitoring of air pressure.
Lightweight Design	Easy to carry and maneuver.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose to the compressor outlet.
Ensure the power switch is in the OFF position.
Plug the compressor into a grounded outlet.
Turn the power switch ON to start the compressor.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Before using the compressor, ensure it is properly set up.

Check the oil level if applicable (this model is oil-free).
Inspect all connections for leaks.
Set the desired pressure using the regulator.
Test the compressor with a small application.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 1.5 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Noise Level: 68 dBA.
Pump Type: Oil-free.
Air Delivery: 2.0 SCFM at 90 PSI.

Controls and Settings

The compressor features a power switch, pressure regulator, and pressure gauge for easy operation.

Power Switch: Turns the compressor ON/OFF.

Pressure Regulator: Adjusts the output pressure to the desired level.

Pressure Gauge: Displays the current tank pressure.

Connecting Devices

Connect tools and accessories using the air hose.

Ensure the compressor is OFF before connecting.
Match the hose to the tool's air inlet.
Turn the compressor ON to supply air.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor effectively.

Turn the power switch ON.
Set the desired pressure using the regulator.
Connect your tool and start using it.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Check for leaks regularly.
Drain the tank after each use to prevent rust.
Inspect the air filter and clean or replace as needed.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear safety goggles and ear protection.
Do not operate in wet conditions.
Keep the compressor away from flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose components	Tighten all screws and fittings.
Overheating	Blocked air intake	Clean air intake filter.

Reset: Unplug and plug back in to reset the compressor.