Bostitch CAP1512-OF Air Compressor Manual

The Bostitch CAP1512-OF is a 1.5-gallon oil-free air compressor designed for quiet operation and portability. It features a maximum pressure of 150 PSI, a 2.0 SCFM at 90 PSI, and is ideal for a variety of applications including inflation, stapling, and nailing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 1.5-gallon tank, pressure gauge, quick coupler, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and reduces the risk of oil contamination.
1.5-gallon tank	Compact size for easy transport and storage.
150 PSI maximum pressure	Provides sufficient pressure for a variety of tools.
2.0 SCFM at 90 PSI	Efficient performance for quick recovery time.
Quick coupler	Allows for easy connection and disconnection of air hoses.
Safety valve	Prevents over-pressurization for user safety.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a grounded outlet: Use a power source that matches the compressor's requirements.
Check for leaks: Turn on the compressor and inspect connections for air leaks.

WARNING! Always ensure the compressor is off and unplugged during setup.

First-Time Setup

Power on the compressor; allow it to build pressure before use.

Set the desired pressure: Use the pressure gauge to adjust settings.
Check connections: Ensure all hoses and fittings are secure.
Test operation: Run the compressor briefly to ensure functionality.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 1.5 gallons.
Max Pressure: 150 PSI.
SCFM: 2.0 SCFM at 90 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Noise Level: 68 dBA for quiet operation.
Dimensions: 18.5 x 18.5 x 18 inches.

Controls and Settings

Access the pressure settings via the pressure gauge and regulator knob. The on/off switch is located on the front panel.

Safety Features: Includes a safety valve and thermal overload protection.

Connecting Devices

Connect air tools using the quick coupler. Ensure the compressor is off before making connections.

Turn off the compressor and disconnect the power.
Attach the air hose to the quick coupler.
Connect your air tool to the other end of the hose.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Allow the compressor to reach the desired pressure.
Use your air tool as needed.
Turn off the compressor after use.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear.

WARNING! Failure to follow safety guidelines may result in serious injury.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power source issue	Check power cord and outlet.
No pressure	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Loose parts	Tighten any loose screws or components.
Pressure drops	Faulty regulator	Replace the regulator if necessary.

Reset: If the compressor has a reset button, use it as needed.

Service: For support, contact Bostitch customer service.