Bostitch C24 Air Compressor Manual

The Bostitch C24 Air Compressor is a compact and powerful air compressor designed for various applications including inflation, nailing, and stapling. It features a 2.5-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.5-gallon tank, 150 PSI maximum pressure, oil-free pump, and lightweight design for portability.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
2.5-Gallon Tank	Compact size for easy storage and transport.
150 PSI Maximum Pressure	Provides sufficient pressure for various applications.
Lightweight Design	Easy to carry and maneuver.
Quick Recovery Time	Fast refilling for continuous use.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the pressure regulator is set to the desired PSI.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is placed in a well-ventilated area and avoid exposure to water.

First-Time Setup

Power on the compressor and follow the setup instructions.

Check all connections for leaks.
Set the pressure regulator to the desired level.
Test the compressor with a small application.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 2.5 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Noise Level: 68 dBA.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Adjust the pressure settings as needed for different applications.

Tip: Always check the pressure gauge before using the compressor.

Connecting Devices

Connect air tools using the appropriate fittings and hoses.

Ensure the compressor is off before connecting tools.
Match the fittings to the air tool requirements.
Turn on the compressor and set the desired pressure.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor and allow it to build pressure.
Connect your air tool and adjust the pressure as needed.
Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Never exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance ensures optimal performance and longevity of the compressor.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear.

WARNING! Keep the compressor away from flammable materials and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch.

Service: For further assistance, contact Bostitch customer service.