Bostitch BTFP02006 Air Compressor Manual

The Bostitch BTFP02006 is a portable air compressor designed for various applications including inflation, nailing, and stapling. It features a 6-gallon pancake-style tank, a maximum pressure of 150 PSI, and a 2.6 SCFM at 90 PSI for quick recovery time. The compressor is lightweight and easy to transport, making it ideal for both home and professional use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, 2.6 SCFM at 90 PSI, oil-free pump, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
Oil-Free Pump	Requires no maintenance and provides clean air
Easy-to-Read Gauges	Allows for quick monitoring of pressure levels
Lightweight Design	Easy to transport and store
Quick Recovery Time	Reduces downtime between tasks

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into AC power: Use a grounded outlet for safety.
Check for leaks: Use soapy water to test connections.

WARNING! Ensure the compressor is off before connecting or disconnecting hoses.

First-Time Setup

Power on the compressor; allow it to build pressure before use.

Set the desired pressure: Adjust the regulator to the required PSI for your application.
Check the safety valve: Ensure it is functioning properly before operation.
Test the compressor: Run it briefly to ensure it operates correctly.

CAUTION! Do not exceed the maximum pressure rating of 150 PSI.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
SCFM at 90 PSI: 2.6.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 17.5 x 17.5 x 18.5 inches.
Noise Level: 78 dBA.

Controls and Settings

Access the pressure regulator and gauges located on the front panel. The compressor features an on/off switch and a safety valve for added protection.

Connecting Devices

Connect tools using the air hose to the compressor outlet.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet to the hose fitting.
Turn on the compressor and set the desired pressure.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

To operate, turn on the compressor and allow it to reach the set pressure before using connected tools.

Monitor the pressure gauge during operation.
Adjust the regulator as needed for different tools.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact Bostitch customer support.