Bostitch BTFP02000 Air Compressor Manual

The Bostitch BTFP02000 is a portable air compressor designed for various applications, including inflation, nailing, and stapling. It features a 6-gallon pancake-style tank, a maximum pressure of 150 PSI, and a low noise level of 78.5 dBA, making it suitable for indoor use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and lightweight design.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Delivers high pressure for efficient performance
Oil-Free Pump	Requires no maintenance and reduces the risk of oil contamination
Low Noise Level	Operates at 78.5 dBA for quieter use
Portable Design	Easy to transport and store

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose to the compressor outlet.
Ensure the pressure regulator is set to the desired PSI.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Always use the compressor in a well-ventilated area and avoid using it near flammable materials.

First-Time Setup

Power on the compressor; follow the setup instructions.

Check all connections for leaks.
Set the pressure regulator to the required level for your application.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Ensure the compressor is on a flat surface to prevent tipping.

Specifications

Tank Size: 6 gallons.
Max Pressure: 150 PSI.
Noise Level: 78.5 dBA.
Power Source: 120V AC.
Weight: 30 lbs.
Pump Type: Oil-free.

Controls and Settings

Access controls on the front panel: power switch, pressure regulator, and quick-connect air outlet.

Pressure Regulator: Adjusts the output pressure for different applications.

Connecting Devices

Connect air tools using the quick-connect fitting.

Ensure the compressor is off before connecting tools.
Match the tool's air fitting to the compressor outlet.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating Instructions

To operate the compressor, follow these steps:

Turn on the compressor using the power switch.
Allow the compressor to build pressure to the set level.
Use the air tools as needed, monitoring the pressure gauge.
Turn off the compressor when finished.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear or damage.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For assistance, contact Bostitch customer service.