Bostitch Air Compressor Model CWC200ST Manual

The Bostitch CWC200ST is a compact and powerful air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. It features a 2-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2-gallon tank, 150 PSI max pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
2-Gallon Tank	Provides sufficient air storage for various tasks
150 PSI Maximum Pressure	Allows for a wide range of applications
Oil-Free Pump	Requires less maintenance and is easier to use
Lightweight Design	Easy to transport and store
Pressure Gauge	Allows for easy monitoring of air pressure

Installation

Unpack and inspect the contents. Place the compressor on a stable surface.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into AC power: Use a grounded outlet for safety.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Always use the compressor in a well-ventilated area and avoid using it near flammable materials.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure regulator to adjust.
Connect tools: Ensure the correct fittings are used for your tools.
Test operation: Run the compressor briefly to ensure functionality.

CAUTION! Ensure all connections are secure before operating.

Specifications

Tank Size: 2 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 18 x 12 x 12 inches.
Noise Level: 68 dBA.
Pump Type: Oil-free.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Ensure the pressure gauge is visible for monitoring.

Important Controls: On/Off switch, pressure regulator, and quick-connect fittings.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Use the appropriate air hose for your tools.
Connect the hose to the quick-connect fitting.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired level.
Connect your pneumatic tool and begin operation.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and damage.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Do not operate in wet or damp conditions.
Keep the compressor away from flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
No pressure build-up	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Worn components	Inspect for wear and replace parts as needed.
Pressure gauge not working	Faulty gauge	Replace the pressure gauge.

Service: For support, contact Bostitch customer service.