Bostitch Air Compressor 6 Gallon 150 PSI Manual

The Bostitch Air Compressor is a powerful and portable 6-gallon compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. With a maximum pressure of 150 PSI, this compressor provides ample power for your needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides a good amount of air storage for various tasks.
150 PSI Maximum Pressure	Delivers high pressure for efficient operation.
Oil-Free Pump	Requires less maintenance and provides clean air.
Lightweight Design	Easy to transport and store.
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of pressure levels.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose to the compressor outlet.
Ensure the power cord is plugged into a suitable outlet.
Check that the pressure regulator is set to the desired level.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure.

Set the pressure regulator to the desired PSI.
Connect your pneumatic tool or accessory.
Turn on the tool to begin operation.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Compressor Type: Oil-free.
Weight: Lightweight for easy transport.
Power Source: 120V AC.
Operating Temperature: Standard room temperature.

Controls and Settings

Access the pressure regulator and on/off switch located on the compressor panel.

Pressure Gauge: Displays current tank pressure.

Adjust the regulator to set the desired output pressure for your tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the compressor outlet.
Connect the other end of the hose to your pneumatic tool.
Turn on the compressor and then the tool.

Tip: Always check for leaks in the hose connections.

Operating the Compressor

To operate, simply turn on the compressor and allow it to build pressure.

Monitor the pressure gauge during operation.
Adjust the regulator as needed for your application.
Turn off the compressor when finished.

WARNING! Do not operate in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not exceed the maximum pressure rating.
Keep the compressor away from flammable materials.
Use in well-ventilated areas.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose parts	Tighten any loose screws or components.
Overheating	Blocked air intake	Clear any obstructions from the intake.

Reset: Unplug and plug back in to reset the compressor.