Bostitch Air Compressor 6 Gallon 135 PSI Manual

The Bostitch Air Compressor 6 Gallon 135 PSI is a portable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and a lightweight design for easy transport. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 135 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
135 PSI Maximum Pressure	Delivers high pressure for efficient operation
Oil-Free Pump	Requires less maintenance and is environmentally friendly
Lightweight Design	Easy to carry and transport
Easy-to-Read Pressure Gauge	Allows for accurate pressure monitoring

Installation

Unpack and inspect the compressor. Place it on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into AC power: Use a grounded outlet.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; allow it to build pressure.

Set the desired pressure: Use the pressure regulator to adjust.
Check connections: Ensure all hoses and fittings are secure.
Test operation: Use a pneumatic tool to verify functionality.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 135 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Pump Type: Oil-free.
Noise Level: 78 dBA.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect pneumatic tools using the air hose.

Turn off the compressor before connecting tools.
Ensure the hose is securely attached to both the compressor and the tool.
Power on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Power on the compressor and allow it to build pressure.
Use the pressure regulator to set the desired output pressure.
Connect your pneumatic tool and begin operation.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using pneumatic tools.
Keep the compressor in a dry, well-ventilated area.
Do not operate the compressor in flammable environments.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check the power cord and outlet.
No pressure build-up	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Worn components	Inspect and replace worn parts.
Pressure drops quickly	Leak or faulty regulator	Check for leaks and replace the regulator if needed.

Reset: Unplug and plug back in to reset the compressor.

Service: For support, contact Bostitch customer service.