Bostitch 6 Gallon Oil Free Air Compressor Manual

The Bostitch 6 Gallon Oil Free Air Compressor is designed for portability and ease of use, making it ideal for a variety of tasks including inflation, stapling, and nailing. This compressor features a lightweight design, a powerful motor, and an oil-free pump for maintenance-free operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, 150 PSI max pressure, quick recovery time, and easy-to-read pressure gauges.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
6-Gallon Tank	Provides ample air supply for various applications.
150 PSI Max Pressure	Allows for a wide range of tools to be used.
Quick Recovery Time	Reduces downtime between uses.
Lightweight Design	Easy to transport and store.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into a power source: Use a grounded outlet to avoid electrical hazards.
Check for leaks: Use soapy water to check connections before use.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure: Turn the regulator knob to set the desired PSI.
Test the compressor: Run it briefly to ensure proper operation.
Check the safety valve: Ensure it functions correctly before use.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 6 gallons.
Max Pressure: 150 PSI.
Motor: 0.8 HP (Peak).
Weight: 30 lbs.
Dimensions: 18.5 x 18.5 x 18 inches.
Power Source: 120V AC, 60Hz.
Noise Level: 78 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for your tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the appropriate fittings.

Turn off the compressor before connecting tools.
Ensure the fittings match your air tool requirements.
Check for leaks after connecting.

Tip: Always use the correct size hose for optimal performance.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor and allow it to build pressure.
Monitor the pressure gauge during operation.
Turn off the compressor when finished and release pressure.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not operate in wet conditions.
Keep the compressor away from flammable materials.
Use appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Reset: Unplug and plug back in to reset the system.

Service: Contact Bostitch customer service for assistance.