Bostitch 6 Gallon Compressor Manual

The Bostitch 6 Gallon Compressor is a portable air compressor designed for a variety of applications, including inflation, nailing, and stapling. It features a powerful motor, a lightweight design, and a durable tank that provides reliable performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, quick recovery time, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tools
Oil-Free Pump	Requires no maintenance and reduces the risk of oil contamination
Quick Recovery Time	Fast refilling for continuous operation
Pressure Gauge	Easy monitoring of air pressure
Portable Design	Lightweight and easy to transport

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug into a grounded electrical outlet.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the compressor; allow it to build pressure before use.

Set the desired pressure using the regulator.
Check for any air leaks before starting your project.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Capacity: 6 gallons.
Max Pressure: 150 PSI.
Motor: 1.5 HP.
Weight: 30 lbs.
Dimensions: 18 x 18 x 18 inches.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Attach the air hose to the tool.
Connect the other end to the compressor outlet.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Turn on the compressor using the power switch.
Allow the compressor to reach the set pressure.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor in a well-ventilated area.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch.

Service: For assistance, contact Bostitch customer service.