Bostitch 6 Gallon Air Compressor Manual

The Bostitch 6 Gallon Air Compressor is a portable and powerful air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a low noise level for quiet operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, oil-free pump, 150 PSI maximum pressure, quick recovery time, and lightweight design for portability.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
150 PSI maximum pressure	Allows for a wide range of applications.
6-gallon tank	Provides ample air storage for extended use.
Low noise level	Operates quietly for indoor use.
Portability	Lightweight design with a handle for easy transport.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure before using any tools.

Set the pressure regulator to the desired PSI for your application.
Check all connections for leaks before use.
Test the compressor by running a tool for a few minutes.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Noise Level: 78 dBA.
Weight: 30 lbs.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Automatic shut-off when maximum pressure is reached, thermal overload protection.

Connecting Devices

Connect pneumatic tools using the air hose. Ensure the compressor is off before making connections.

Match the air hose to the tool's inlet.
Turn on the compressor and set the desired pressure.
Test the tool for proper operation.

Tip: Always check for leaks before using the compressor.

Operating the Compressor

To operate, turn on the compressor and allow it to build pressure. Use the pressure regulator to adjust the output pressure as needed.

Monitor the pressure gauge during operation.
Turn off the compressor when finished and unplug it.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Use personal protective equipment as necessary.

WARNING! Keep the compressor away from flammable materials and ensure proper ventilation during use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Pressure drops	Faulty regulator	Replace the pressure regulator.

Reset: Unplug and plug back in to reset the compressor.

Service: For assistance, contact Bostitch customer service.