Bostitch 6 Gal Air Compressor Manual

The Bostitch 6 Gallon Air Compressor is a portable and powerful air compressor designed for a variety of tasks, including inflation, nailing, and stapling. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a lightweight design for easy transport. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, lightweight design, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air supply for various applications
150 PSI Maximum Pressure	Delivers high pressure for efficient operation
Oil-Free Pump	Requires less maintenance and is easier to use
Lightweight Design	Easy to transport and maneuver
Easy-to-Read Pressure Gauge	Allows for precise monitoring of air pressure

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into a power source: Use a grounded outlet to avoid electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Always ensure the compressor is on a stable surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the instructions for initial setup.

Set the desired pressure: Use the pressure regulator to adjust to your needs.
Check the safety valve: Ensure it is functioning correctly before use.
Test the compressor: Run it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Compressor Type: Oil-free.
Noise Level: 78 dBA.
Dimensions: 18 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Includes a safety valve and thermal overload protection.

Connecting Devices

Connect air tools using the quick-connect coupler. Ensure the compressor is off before making connections.

Turn off the compressor before connecting any tools.
Match the air tool to the appropriate coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check the compatibility of your air tools with the compressor.

Operating the Compressor

Follow these steps to operate the compressor safely and effectively.

Power on the compressor and allow it to build pressure.
Use the pressure regulator to set the desired output pressure.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Keep the area clear of flammable materials and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power source issue	Check power cord and outlet.
Low pressure	Leak in hoses	Inspect and replace damaged hoses.
Excessive noise	Loose components	Tighten all screws and fittings.
Compressor cycles frequently	Improper pressure setting	Adjust pressure regulator to appropriate level.

Reset: Unplug and plug back in to reset the compressor.

Service: Contact Bostitch customer service for assistance.