Bostitch 175869REVA Air Compressor Manual

The Bostitch 175869REVA is a powerful air compressor designed for various applications, including powering pneumatic tools, inflating tires, and more. It features a robust motor, a large tank capacity, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, quick coupler, pressure gauge, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance between portability and air supply.
Quick coupler	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays current tank pressure for monitoring.
Safety valve	Prevents over-pressurization for user safety.

Installation

Unpack and inspect contents. Place on a stable surface away from moisture.

Connect air hose: Ensure the compressor is off before connecting.
Plug into AC power: Use a grounded outlet.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set pressure: Adjust the regulator to the desired PSI.
Test operation: Connect a tool and ensure proper function.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Model: Bostitch 175869REVA.
Tank Capacity: 6 gallons.
Max Pressure: 150 PSI.
Motor: 1.5 HP.
Weight: 30 lbs.
Dimensions: 24 x 18 x 18 inches.
Power Source: 120V AC.

Controls and Settings

Access controls via the front panel: Power switch, pressure regulator, and gauges.

Pressure Regulator: Adjusts output pressure for tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Air Hose: Connect to the quick coupler. Ensure all connections are secure.

Turn off the compressor before connecting devices.
Match the hose to the tool's air inlet.

Tip: Always check for leaks after connecting.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor and wait for it to reach the desired pressure.
Connect your pneumatic tool and begin operation.
Monitor pressure levels during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank regularly to prevent rust.
Check and replace air filters as needed.
Inspect hoses and connections for wear.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before use. Always wear appropriate safety gear.

WARNING! Keep the compressor away from flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power source issue	Check outlet and power cord.
No air pressure	Leak in the system	Inspect connections and hoses.
Excessive noise	Loose parts	Tighten screws and bolts.
Overheating	Blocked air intake	Clear any obstructions.

Service: For further assistance, contact Bostitch customer support.