Bostitch 150 PSI 6 Gallon Air Compressor Manual

The Bostitch 150 PSI 6 Gallon Air Compressor is designed for a variety of tasks, including powering pneumatic tools, inflating tires, and more. With a compact design and lightweight construction, this air compressor is easy to transport and store. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Delivers high pressure for efficient operation
Oil-Free Pump	Requires no maintenance and reduces oil spills
Easy-to-Read Gauges	Allows for quick monitoring of pressure levels
Portable Design	Lightweight and easy to transport

Installation

Unpack and inspect contents. Place on a stable surface.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a power outlet: Use a grounded outlet to prevent electrical hazards.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the compressor; follow the setup instructions provided.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.
Check the safety features: Ensure the safety valve is functioning correctly.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 30 lbs.
Noise Level: 78 dBA.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access controls on the front panel: pressure gauge, regulator, and on/off switch.

Pressure Gauge: Displays current tank pressure.

Regulator: Adjusts the output pressure for tools.

Connecting Devices

Connect tools via the air hose to the quick-connect fitting.

Ensure the compressor is off before connecting.
Match the tool's air inlet to the hose fitting.
Turn on the compressor and adjust pressure as needed.

Tip: Always check the tool's specifications for required pressure.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired level.
Connect your pneumatic tool and begin operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent rust.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear safety goggles and hearing protection.
Do not operate in wet conditions.
Keep children and pets away from the compressor during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Compressor cycles frequently	Tank not draining	Drain tank and check for leaks.

Service: For assistance, contact Bostitch customer service.