Bostitch 1.5 HP 6 Gallon Air Compressor Manual

The Bostitch 1.5 HP 6 Gallon Air Compressor is a compact and powerful tool designed for a variety of applications, including inflation, nailing, and stapling. It features a 6-gallon tank, delivering 2.6 SCFM at 90 PSI for quick recovery time. The compressor is equipped with a durable oil-free pump for maintenance-free operation and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6-gallon tank, oil-free pump, pressure gauge, quick connect coupler, and a lightweight design for easy transport.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from flammable materials.

1. Connect the air hose to the quick connect coupler.
2. Ensure the drain valve is closed before starting.
3. Plug the compressor into a grounded outlet.
4. Turn on the power switch to start the compressor.

WARNING! Always ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Before using the compressor for the first time, follow these steps:

1. Check the oil level (if applicable) and fill as necessary.
2. Set the desired pressure using the pressure regulator.
3. Attach the appropriate air tool to the hose.
4. Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of your air tools.

Specifications

• Motor Power: 1.5 HP.
• Tank Capacity: 6 gallons.
• Max Pressure: 150 PSI.
• Air Delivery: 2.6 SCFM at 90 PSI.
• Weight: 30 lbs.
• Dimensions: 24 x 18 x 18 inches.
• Power Source: 120V AC.

Controls and Settings

The compressor features a power switch, pressure regulator, and pressure gauge for easy operation.

Power Switch: Turns the compressor on and off.

Pressure Regulator: Adjusts the output pressure to the air tool.

Pressure Gauge: Displays the current tank pressure.

Connecting Devices

To connect devices, ensure the compressor is off and follow these steps:

1. Attach the air hose to the quick connect coupler.
2. Connect the other end of the hose to your air tool.
3. Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

To operate the compressor:

1. Turn on the power switch.
2. Allow the compressor to build pressure until it reaches the set limit.
3. Use the air tool as needed, monitoring the pressure gauge.
4. Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance:

1. Drain the tank regularly to prevent moisture buildup.
2. Check and replace the air filter as needed.
3. Inspect hoses and connections for wear and tear.
4. Store the compressor in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor:

• Wear appropriate personal protective equipment.
• Keep the compressor away from flammable materials.
• Do not exceed the maximum pressure rating.
• Ensure proper ventilation during use.

Troubleshooting

Service: For assistance, contact Bostitch customer service.